Remote Control; Cleaning And Maintenance; Environmental Information - universalblue UVP1200-20 Manual De Instrucciones

• NATURAL mode:
automatically change speed, going
from mild wind gusts to air gusts with
greater speed.
• SLEEP mode: The fan is simulating
a softer wind mode by cycling one
speed higher
As you can see at LCD screen, different
lights (pilot lights) will turn on when you
select mode, swing and time.
To know the time you have programmed,
please pay attention to the LCD screen, you
will see that when you press the "TIMER"
button once, it will activate 30 minutes
time, and therefore the pilot light of the
screen that indicates this time will lights
up. If you press the "TIMER" button again,
the pilot light that indicates 1 hour will
lights up. And if you press the "TIMER"
button again, the pilot light that indicates
1 hour will remain lighted up and the pilot
light that indicates 30min will also light
up, in this case the fan is programmed
for 1 hour and a half. This process can be
repeated until 7 hours and 30 minutes are
programmed, adding the amount indicated
by the light pilots. See table 02 on page 6.
When the fan is not being used, please
unplug the fan.

REMOTE CONTROL

For an easy and more efficient use, this
appliance includes a remote control .
In order to use the remote control, please
remove the film covering the bateries and
point the remote control to the fan.
All functions could be easily controlled by
the display or the remote control included
with this fan.

CLEANING AND MAINTENANCE

This appliance does not require a lot of
maintenance. However, in order to extend
the life of the appliance, we suggest that
you read the following notes about cleaning
The fan will and maintenance:
• Switch off and unplug from the
power supply before assembling or
disassembling and cleaning.
• Keep the air grills at the back of the
main body free from dust– use a
vacuum cleaner to remove these when
necessary.
• Fan parts should be cleaned using a
mild soap and a damp cloth or sponge.
Do not allow any water or other liquid
penetrate into the motor case.
• Remove soap film with clean water
thoroughly.
• If the appliance is not going to be
used for long time, place the fan in its
original package and keep it in a safety
and dry place.
Do not use harsh detergents,
chemical cleaners or solvents
as they
surface of the fan components.

ENVIRONMENTAL INFORMATION

This appliance is labelled in
compliance with European
directive 2012/19/EU for Waste
Electrical
Equipment
ensuring that this appliance is
disposed of correctly, you will help prevent
any possible damage to the environment
and to human health, which might
otherwise be caused if it were disposed of
in the wrong way.
The symbol on the product indicates that
it may not be treated as normal household
waste. It should be taken to a collection
point for the recycling of electrical and
electronic goods.
This appliance requires specialist waste
disposal. For further information regarding
the treatment, recover and recycling of this
product please contact your local council,
your household waste disposal service, or
the shop where you purchased it.
EN
may damage the
and Electronic
(WEEE). By
19