Troubleshooting - Tronic TPB 20000 A1 Instrucciones De Utilización Y De Seguridad

P Troubleshooting
= Problem
= Cause
= Solution
The power bank
It may be that the power bank is not connected properly.
Check that it is connected.
In order to charge the power bank, use a power supply
with an output voltage and current matching the rated input
voltage and current as stated in „Technical specifications" of
this user manual.
A connected device is not being charged.
The battery is drained.
Charge the battery.
The device is not connected.
The device is not connected. Check that it is connected.
Briefly press the ON / OFF button
process.
The current consumption of the connected device might be
too low.
Check with your connected device manual and see if your
connected device current consumption comply with this
product. The minimal output current of the power bank is
approx. 60 mA.
is not being charged.
3
6
to begin the charging
GB/IE 35