Bypassing; Bypassing Zones - Bosch AMAX panel 4000 Guia Del Usuario

AMAX panel 4000 / AMAX panel 4000
EN
7

Bypassing

7.1

Bypassing Zones

By bypassing Zones, one or more zones are disabled for one arming cycle. After bypassing a
zone, you can arm the system even when a zone is in alarm state.
How to Bypass a Zone
a) Enter your code + [3] [1] and press [#]. The STAY indicator flashes fast.
b) Enter the zone number you wish to bypass, then press the [*] key.
(If you wish to bypass multiple zones, please repeat step b).
c) Press [#] to exit.
How to Unbypass a Zone
LED Keypad
a) Enter your code + [3] [1] and press [#] . The STAY indicator flashes fast.
b) Enter the zone number you wish to unbypass, then press the [*] key.
(If you wish to unbypass multiple zones, please repeat step b).
c) Press [#] to exit.
Text Keypad:
a) Enter your code + [3] [2] and press [#] . The STAY indicator flashes fast.
b) Enter the zone number you wish to unbypass, then press the [*] key.
(If you wish to unbypass multiple zones, please repeat step b)
d) Press [#] to exit.
Bypassing Faults and Tamper conditions (Except Zone Tampers)
One or more faults and tamper conditions are disabled for one arming cycle. After bypassing a
Fault or Tamper condition, you can arm the system even when a Fault or Tamper condition
exists.
How to bypass a Fault or Tamper Condition
a) Enter your code + [3] [4] and press [#]. It beeps twice.
Bypass Inquire
The bypass inquires displays all bypassed zones.
a) Enter your code + [3] [3] and press [#]. It beeps twice.
b) Move up and down with [▲] or [▼] to display all bypassed zones.
c) Press [#] to exit.
Bosch Sicherheitssysteme GmbH User Guide
Bypassing | en
19
2013.07 | 03 | F.01U.267.114