Powers Of Common Appliances - KNOVA KN GEN-30 Manual Del Usuario

ACCESSORIES INSTALLATION
• Two-wheel long axie (applicable to generator units
of KN GEN-30)
Handrail
Vibration
reduction
bracket
Vibration reduction
rubber pad
• Four-wheel long axie (applicable to generator units
of KN GEN-65, KN GEN-80)
Long axle
Some of the units, which are of the electrical starting type,
need to be equipped with external storage battery bracket.
Please conduct the installation according to the following
drawing.

POWERS OF COMMON APPLIANCES

Electric equipment
Flat panel
television
27"
Energy
saving
lamp
Electric
cooker
Wheel
Axle
Axle clamp
Brake
dise
Short axle
Axle clamp
Rated
power (W) power (W)
120
5 ~ 50
1000
Positive
Cotter
terminal
pin
Washer
Operating steps and installation instructions:
1 Install the positive terminal and negative terminal onto
the generation unit as specified in the drawing.
2 Install the storage battery bracket onto the bracket
connection tube.
3 Install the storage battery shield onto the bracket
Wheel
connection tube.
Cotter
4 Install the assembled bracket onto the unit.
pin
5 Put the storage battery into the bracket.
6 Hook the hook bolt to the hole of the bracket,
and install it onto the storage battery clamp.
Washer
7 Tighten the bolt and install the storage battery
onto the bracket.
8 Connect the storage battery wires and connect
the negative one first. The connected terminals may
be different as the models of the storage batteries
are different. Take material object as.
9 Some storage batteries need to be filled with electrolyte
before installation. Please read the specification of
the storage battery carefully.
Starting
Electric equipment
120 Computer
5 ~ 50
DVD
Refrigerator
1000
9
Storage
battery
Negative
terminal
Bracket
connection tube
Starte cable
(positive)
Starte
solenoid
Rated
power (W)
Storage
battery
clamp
Storage
battery
shield
Storage
battery
shield
Storage
battery
bracket
Starting
power (W)
400
400
100 100
50 300