Refrigerator Care; Reinstalling/Using Refrigerator Again - Haier QJS15HYRFS Instrucciones De Instalación Y Manual Del Usuario

REFRIGERATOR CARE

VACATION AND MOVING (Cont.)
MOVING
IMPORTANT: Handle with care when moving refrigerator to
avoid either damaging the refrigerant tubing or increasing the
risk of a leak.
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all frozen
food in dry ice.
2. Unplug refrigerator.
3. Clean, wipe, and dry thoroughly.
4. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
"Leveling."
6. Tape the doors closed and tape the power cord to the back
of the refrigerator. When you get to your new home, put
everything back and refer to the "Installation Instructions"
section for preparation instructions.
14
READ AND SAVE THESE INSTRUCTIONS
REINSTALLING/USING
REFRIGERATOR AGAIN
If the refrigerator has been placed in a horizontal or tilted
position for any period of time wait 2 to 5 hours before
plugging it in to allow the oil to settle into the compressor.
1. Clean refrigerator. See "Cleaning."
2. Place refrigerator in desired location and level. See
"Installation Instructions."
3. Plug into a grounded 3 prong outlet.
49-1000588 Rev. 0