Flama 1317FL Manual De Instrucciones página 28

operate and the compressor will start up
after 3 seconds.
When the ambient humidity ≤ the defined
humidity -3%, the compressor will stop.
The speed and humidity of the fan can be
adjusted in automatic mode.
Continuous drying mode
The dehumidifier continues working, but
the humidity cannot be adjusted.
Rest mode
Press the MODE button, which will light up
and start the rest function. If no operation
occurs within 10 seconds, all the indicators
will gradually turn off and the fan speed
will automatically change from high to low.
Press any button to activate the indicator.
Press the MODE button again to leave rest
mode.
The humidity is adjustable in rest mode.
Humidity control button (HUM) (13)
In automatic mode or rest mode, this
button can be pressed to adjust the
defined humidity.
Each time the button is pressed, the
defined humidity increases by 5% within
the range of 30%–80%.
Press and hold this button to see the
current ambient temperature. 5 seconds
later, the screen will return to showing the
current humidity.
Timer button (TIMER) (14)
Press this button to define the timer
function for between 0-24 hours. Each
interval is of 1 hour. Each time the button
is pressed, the time increases by 1 hour
and the corresponding time is shown on
the screen. Setting the value to "00" will
26
cancel the timer function. The indicator
will turn off.
After the timer is set and finished, the
timer LED will remain lit during the set
period of time. After the time is up, the
timer LED will turn off automatically.
When operating, set the time for the
dehumidifier to turn off;
In rest mode, set the time for the
dehumidifier to turn on.
Fan speed button (SPEED) (15)
The speed of the fan can only be adjusted
in automatic mode.
Press this button to alternate the fan speed
between low and high. The corresponding
fan speed indicator will light up.
Lock button (LOCK) (16)
Press and hold this button to activate the
child lock function. The child lock indicator
light will turn on. All the buttons will be
locked and non-operational.
Press the button again and the indicator
light will turn off and the button will be
deactivated.
Turning off the dehumidifier will
automatically cancel the child lock
function.
Indicator light (2)
Ambient humidity <45% - blue light.
45≤ ambient humidity ≤65% - green light.
Ambient humidity > 65% - red light.
If the display shows E0, E2, CL, CH, LO or
HI, the light will be red.
www.flama.pt