Precautions For Use - Nolan N60-6 Instrucciones

N60-6
of vision. It is useful in all sorts of situations, both on long journeys out of town and
shorter town trips.
Moreover, the fastening system allows you to assemble and disassemble the sun-
screen for ordinary maintenance and cleaning, using no tools.
1 OPERATION
The VPS mechanism allows to activate the sunscreen by simply lowering it until the
visor field of vision is partially covered. In this way, the light transmittance is reduced
as desired. At any time, without operating the visor, the VPS can be deactivated with a
simple movement and easily lifted up to restore the normal conditions of visibility and
protection guaranteed by the approved helmet visor.
1.1 To activate the VPS, move the slider as in Fig.6A until you hear a click, confirming
that the VPS is in the desired position.
The VPS is adjustable in a range of intermediate positions to ensure the best
comfort for the user with respect to the terms of use.
1.2 To deactivate the VPS, move the slider as in Fig.6B.
2

PRECAUTIONS FOR USE

Current homologation standards (ECE22-06) establish that the minimum light trans-
mittance levels of visors must be no less than 80%; for homologated sunscreens, the
minimum transmittance level must be no less than 20%.
The regulation itself also contemplates the simultaneous use of the visor and sun-
screen, both as standard.
WARNING
We recommend your using of the VPS only and solely together with the approved
-
standard visor, which has a transmittance value greater than 80%.
- Since the VPS does not assure you the same protection as the one provided by
the visor, it has to be used only when the helmet visor is lowered.
- The VPS can only be activated during daytime and in weather and environmental
di conditions with a particular light, for example, strong brightness caused by high
intensity and/or incidence of sunlight.
- At night and/or in conditions of poor visibility, the VPS must be deactivated.
- Should sunglasses and/or photochromic lenses be used, the VPS must be deac-
tivated.
- Always check that the VPS is properly positioned according to the different weather/
environmental conditions and/or to the above-mentioned usage recommendations.
- Use the special slider to activate/deactivate the VPS; do not deactivate the VPS
by handling it directly.
- Always make sure that the VPS is clean and that it is operating properly in order to
avoid scratches and/or anomalous wear on it every time it is activated.
- As for VPS and visor maintenance and cleaning operations, please refer to the
appropriate section in the helmet user's manual.
16
INSTRUCTIONS FOR USE