Product Assembly - KitchenAid 5KSMICM Manual Del Propietário

PRODUCT SAFETY (CONTINUED)
22. This appliance is intended to be used in household and similar
applications such as:
staff kitchen areas in shops, offices and other working
-
environments;
farm houses;
-
by clients in hotels, motels and other residential type
-
environments;
bed and breakfast type environments.
-
SAVE THESE INSTRUCTIONS
For complete details on product information, instructions and videos, including Guarantee
information, visit www.KitchenAid.co.uk or www.KitchenAid.eu. This may save you the cost
of a service call. To receive a free printed copy of the information online,

PRODUCT ASSEMBLY

ATTACHING THE ICE CREAM MAKER FOR TILT-HEAD STAND
MIXERS
Before first use
Before using your attachment, remove the "Do not immerse in water" label. The Freeze Bowl,
Dasher, and Drive Assembly must be washed by hand.
1.
Turn Stand Mixer OFF (0) and unplug.
IMPORTANT: Before first use, set freezer to its coldest setting and store the Ice Cream
Bowl in the freezer for a minimum of 16 hours. Do not pour ice cream batter into the
Freeze Bowl until all parts are assembled and the Stand Mixer is running.
2.
Tilt motor head back and remove the mixing bowl.
3.
Place the Dasher inside the Freeze Bowl.
4.
Place the Freeze Bowl on the Bowl-Clamping Plate.
NOTE: Use the Freeze Bowl immediately upon removal from freezer, as it begins to thaw
once removed.
4
call 00 800 381 040 26.