Preparations For Operation; Operating The Appliance - Gymrex GR-MG73 Manual De Instrucciones

13. P – speed program selector (1 to 6)
14. Increase the value
15. Reduce the value
16. S – slow stop
17. M – cycles between these settings:
• Time [8] – time setting (minutes : seconds)
• Speed [9] – speed setting (kmh)
• Distance [10] – distance setting (km)
• Calories [11] – calorie to burn setting

3.2. Preparations for operation

POSITIONING THE APPLIANCE
The maximum ambient temperature and relative humidity limits not to be exceeded
are +40°C and 85% RH, respectively. Position the appliance where good air
circulation is ensured. Keep the appliance away from any hot surfaces. Always
operate the appliance on a level, firm, clean, fireproof, and dry surface and out of
the reach of children and individuals with reduced mental, sensory and intellectual
capacities. Position the appliance where the mains plug can be reached at any time.
Make sure that the mains power ratings match the data on the rating plate!
Keep at least 0.6 m of clearance over and around the appliance, except for the
appliance rear plane which requires 2 m of clearance during operation.

3.3. Operating the appliance

1. Lift the handrail [2] up to deploy the appliance.