Replacing Desktop With Start Screen; Pin And Unpin Your App; Wireless Connection; Connecting A Memory Card - jp.ik LEAP T304 Manual Del Usuario

9.4 Replacing Desktop with Start Screen

If you are more familiar with the interface similar to the Start screen introduced
in Windows 8 series, you can set your device to show the Start screen instead
of the Desktop every time when you power on your laptop. To do so, do the
following steps:
1. Open the Settings screen;
2. Select <Personalization>;
3. In the Personalization screen, enable the option <Use
Start full screen>.
After these steps, you will see the Start screen every time
you turn on your device.
9.5 Pin and unpin an app
Pinning an App to Start menu or taskbar
Removing an App
1. Right click the app that you want to remove from your Start menu or taskbar;
2. Click to remove it from your Start menu or taskbar.
1. Open the Start menu;
2. Right-click on the app that you
want to appear on your Start menu or
taskbar, and an option menu appears;
3. Click <Pin to Start> or <Pin to
taskbar> to add the app to your Start
menu or taskbar.

9.6 Wireless connection

Enabling wireless connection:
1. Open Settings menu and select <Network & Internet>;
2. Select and set the function to ON, as shown below;
3. Click the option "Show available networks", and a network list will appear on
the right part of your screen;
4. Click your desired network's name in the list, and then click Connect. Follow
the instruction on the screen to establish the connection.
Note:
Some networks require a network security key or password for connection. If
necessary, ask the network administrator or the Internet service provider (ISP)
for the required information.

9.7 Connecting a Memory Card

You can utilize your micro SD cards as removable disks and conveniently exchange
data with digital devices such as a digital camera, digital camcorder, MP3, etc.
To insert the micro SD card follow the below steps:
1. Insert the micro SD card into the card slot;
2. Follow the message on the screen to open and view
the files;
3. A Windows Explorer runs and shows all the folders
and files in the micro SD cards, and you can save, move
and delete data as you are handling a storage device.
To remove your memory card:
• Press the card and release. The card will pop up;
• Pull the card out by holding the end of the card.
13