English
STANDARD ACCESSORIES
(1) No. 2 Plus bit ....................................... 1 (W6V3, W6VA3)
(2) Magnetic hex socket (H= 10 m m) .... 1 (W6VB2, W8VB)
(3) Hook ..................................................................................... 1
Standard accessories are subject to change w ithout notice.
OPTIONAL ACCESSORIES (sold separately)
1. For hex-head screw s
Hex-socket
M agnetic type
H = 6.35 m m
H = 7.94 m m
H = 9.53 m m
H = 10 m m
2. For other screw s
Screw
Bit type
head
3. Plastic case
Optional accessories are subject to change w ithout
notice.
APPLICATIONS
Tightening hex-head screw s
Tightening dryw all screw s, w ood screw s and self-
drilling screw s.
4
Non m agnetic type
H = 6.35 m m
H = 7.94 m m
H = 9.53 m m
H = 10 m m
No.1
No.2
No.3
No.1
M agnetic bit holder
No.2
(Short type)
No.1
No.2
No.3
No.1
M agnetic bit holder
No.2
B Size
4 m m
5 m m
Non-m agnetic bit bolder
4. Hook
Sub-Stopper (B)
H 1/4
H 5/16
H 3/8
Bit holder
PRIOR TO OPERATION
1. Pow er source
Ensure that the pow er source to be utilized conform s
to the pow er requirem ents specified on the product
nam eplate.
2. Pow er sw itch
Ensure that the pow er sw itch is in the OFF position.
If the plug is connected to a receptacle w hile the
pow er sw itch is in the ON position, the pow er tool
w ill start operating im m ediately, inviting serious
accident.
3. Extension cord
When the w ork area is rem oved from the pow er
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
Sub-Stopper
Sub-Stopper (A)
Sub-Stopper (C)