Using The Touch Panel; Remote Control Functions; Display Icons - Sangean DDR-43+ Manual De Instrucciones

Using the touch panel

The DDR-43 Plus sound system has a stylish touch panel instead of
conventional buttons.
To operate the buttons simply touch the button area with the tip of a
finger for about half a second. The clock set and system menu functions
marked with a dot ( ) are accessed by means of a long touch
(2-3 seconds) on the appropriate button until the display on the sound
system shows that the command has been accepted.
You may find that at first, the sound system does not always detect
that you have touched a button. If so, try touching with a little
more pressure, or for slightly longer. You will soon find the optimum
touch needed to control your sound system. (See also Touch Panel
Sensitivity Control on page 44.)
The panel may be cleaned using a dry cloth. Do not use abrasives,
cleaning fluids or solvents.

Remote control functions

Most of the functions of the DDR-43 Plus sound system can be
controlled using either the touch panel or the remote control.
However, there are a few functions which are only accessible using the
remote control. These are:
DAB+ / FM radio station presets DAB+ / FM auto-tune
DAB+ menu function CD track access by numbers
CD / iPod random track control Audio mute
As with the front panel, some operations require a longer operation
of the button (explained in the relevant sections). In this case simply
keep your finger held on the remote control button for 2-3 seconds
until the display on the sound system shows that the command has
been accepted.
8

Display icons

A. I. CD indicator
Sleep indicator
B. Alarm 1 and 2 indicators J. WMA indicator
C. Snooze indicator K. MP3 indicator
L.
D. Speaker indicator Repeat all files indicator
E. M. Repeat folder indicator
Clock digits
F. FM indicator N. Repeat single file indicator
G. DAB+ indicator O. Aux input indicator
P.
H. Stereo indicator Two line text display