Auxiliary Input Socket; Line Output Socket - Sangean DDR-43+ Manual De Instrucciones

Ocultar thumbs Ver también para DDR-43+:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Auxiliary input socket

A 3.5mm stereo Auxiliary Input socket is provided on the rear of your
sound system to permit an audio signal to be fed into the unit from an
external audio device such as iPod, MP3 or CD player.
1. Repeatedly press and release the Radio button until "AUX IN"
is displayed.
2. Connect an external audio source (for example, iPod,
MP3 or CD 1 player) to the Auxiliary input socket.
3. Adjust the volume setting on your iPod, MP3 or CD player if
necessary to ensure an adequate signal level, and then use the
Volume Up or Down buttons on the sound system as needed for
comfortable listening.
Line Out socket
A 3.5mm stereo Line Out socket is provided on the rear of your sound
system to permit the audio signal to be fed to an external amplifier or
other audio device.
Inserting an audio cable into this socket will not mute the internal
loudspeaker. Set the volume control to a low level if desired
(minimum level = 1). Setting the volume to MIN may cause the line
output to be muted.
42

Publicidad

Tabla de contenido
loading

Tabla de contenido