Touch Panel Sensitivity Control - Sangean DDR-43+ Manual De Instrucciones

Touch panel sensitivity control

The sensitivity of the touch panel may be adjusted. The default
setting will normally be found to provide satisfactory operation,
however,
the touch panel system may respond differently depending upon the
moisture of the skin. The touch panel sensitivity may be reduced or
increased relative to the standard setting.
1. Press and hold the Menu button so that the display shows
"Set Brightness" on the lower line of the text display.
2. Press and release the Tuning Up or Down buttons until the display
shows "Touch Pad Set".
3. Press and release the Select button to show the current setting.
4. Press and release the Tuning Up or Down buttons to change the
touch panel sensitivity level.
5. Press and release the Select button to save the new setting.
The default setting after a system reset is Normal.
44