Use And Handling Of The Cordless Electrical Power Tool - Parkside PLLA 12 B2 Traducción Del Manual De Instrucciones Original

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control .
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation .

5 . Use and handling of the cordless electrical power tool

a) Charge a rechargeable battery unit using only the charger recom­
mended by the manufacturer. Chargers are often designed for a partic-
ular type of rechargeable battery unit . There is the danger of fire if other
types of rechargeable battery units are used .
b) Only the rechargeable battery units supplied are to be used with an
electrical power tool. The use of other rechargeable batteries may lead
to a risk of injury or fire .
c) When they are not being used, store rechargeable battery units away
from paperclips, coins, keys, nails, screws or other small metal objects
that could cause the contacts to be bridged. Short-circuiting the contacts
of a rechargeable battery unit may result in heat damage or fire .
d) Fluids may leak out of rechargeable battery units if they are misused.
If this happens, avoid contact with the fluid. If contact occurs, flush the
affected area with water. Seek additional medical help if any of the
fluid gets into your eyes. Escaping battery fluid may cause skin irritation
or burns .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable batteries.
for example, from continuous exposure to sunlight, fire, water and
moisture. There is a risk of explosion .
■ 74 │ GB │ MT
Protect the rechargeable battery from heat;
PLLA 12 B2