Operation; Switching On And Off; Battery Charge Level; Swivelling The Cordless Led Working Light - Parkside PLLA 12 B2 Traducción Del Manual De Instrucciones Original

Operation

Never use the appliance for purposes other than those for which it was
designed and only with original parts/accessories . Using attachments or
accessory tools other than those recommended in the operating instructions
can lead to a risk of injury .

Switching on and off

Switching on
♦ Press the ON/OFF switch 2 .
The appliance lights up at maximum brightness .
♦ To reduce the brightness, hold down the ON/OFF switch 2 for
approx . 2 seconds .
To switch back to maximum brightness, press the ON/OFF switch 2
again for approx . 2 seconds .
Switching off
♦ Press the ON/OFF switch 2 .

Battery charge level

■ The status will be shown on the battery display LED 3 as follows:
RED/ORANGE/GREEN = maximum charge
RED / ORANGE = medium charge
RED = low charge – charge the battery

Swivelling the cordless LED working light

The cordless LED working light can be swivelled/adjusted into 8 positions .
♦ Swivel the cordless LED working light 1 by clicking it into one of the 8
positions .
■ 78 │ GB │ MT PLLA 12 B2