Sleep Problems; Sound Problems; Other Problems - jp.ik LEAP W502 Manual Del Usuario

Incorrect characters appear on the screen.
Are the operating system or programs installed correctly? If they are installed
and configured correctly, have the device serviced.
The screen is blank.
If the AC adapter is connected, or if the battery is used, and the battery status
indicator is on, press F4 to make the screen brighter.
Press the power button to resume from sleep mode.
If the problem persists, check if the screen resolution and color are correctly
set, or if the monitor type is correct.

10.3 Sleep problems

The critical low-battery error message appears, and the device turns off.
The battery power is getting low. Connect the AC adapter to the device.
The device enters sleep mode immediately after Power-on.
Make sure that the battery is charged. The operating temperature may also be
too hot. Move it to a cooler environment and try to wake the device.
The device does not return from sleep mode and the device does not work.
Connect the AC adapter, then press the power button. If your device is
powered-off, connect the AC adapter first, and then press the power button
to resume operation.

10.4 Sound problems

No sound can be heard from the speaker even when the volume is turned up.
Make sure that:
• The Mute function is off;
• The combo audio jack is not being used;
• Speakers are selected as the playback device.

10.5 Other problems

Your device does not respond.
To turn on your device, press and hold the power button for 6 seconds or more.
If the device still does not respond, remove the AC adapter.
Your device might lock when it enters sleep mode during a communication
operation. Disable the sleep timer when you are working on the network.
The connected external device does not work.
Do not connect or disconnect any external device cables other than USB while
the device power is on. Otherwise, you might damage your device.
When using a high power consumption external device such as an external
USB optical disk drive, use an external device power adapter. Otherwise, the
device may not be recognized, or the system may shut down as a result.
14