Charging Your Device; Battery Charge Status; Saving Battery Power - jp.ik LEAP W502 Manual Del Usuario

6. CHARGING YOUR DEVICE

We strongly recommend that you fully charge the battery before you turn on
your device for the first time.
1. Plug the adapter into the DC-in, which you can find on the left side of your laptop;
2. Plug the adapter into a wall socket;
3. You shall see the battery indicator starts blinking in blue;
4. When the battery is fully charged, the battery indicator will go off.
Note:
• Never use a damaged charger, damaged power cords or loose electrical sockets.
Unsecured connections can cause electric shock or fire.
• Use only the power adapter that comes with your device. Using a different
power adapter may damage your device.
• Connecting the charger improperly may cause serious damage to the device.
Do not use the charger on other devices, such as tablets or cellphones, since
it can cause damage.
Only use the bundled power adapter. Unplug your device from the power supply
once it is fully charged. Theses devices are not designed to be left connected to the
power supply for long periods of time. Do not use the charger on other devices.

6.1 Battery charge status

By inspecting the taskbar:
In Desktop, move the cursor to the battery icon in the taskbar. A pop-up dialog
box appears and shows you the remaining battery percentage, as shown next.
The battery icon reveals the status of your battery, which described as below:
Battery is fully charged.
Battery is starting to drain.
Battery is about to completely drain, and you should stop using your
computer and charge it at once.
Battery is being charged.
By inspecting the battery indicator:
When your laptop is not powered by the adapter, the color of the battery indicator
shows you the approximate status of your battery.
Battery low: Rapidly blinking in red
Battery being charged: Off

6.2 Saving battery power

Our devices provide options that help you save battery power.
A battery is an expendable supply. Thus, when used over a long period, its
capacity is shortened. If the battery of your device is reduced to under a half
of its initial time, we recommend the purchase of a new battery. Exposures to
temperatures outside it's operation temperature range (5ºC to 35ºC) will cause
battery degradation.
When you don't use the battery for a long time, you must store it after charging
(we recommend you to charge it at least until 30% or 40% of its capacity). This
will extend the battery life time of your device. Our batteries are designed to
keep 80% of their initial capacity after 300 to 500 cycles.
8