Publicidad
Idiomas disponibles
Idiomas disponibles
154729/DW558
5/17/02
2:59 PM
This will unlock the bit lock and allow you to remove the bit.
Maintenance and Inspection
CAUTION: Be sure to switch power OFF and disconnect the plug
during maintenance and inspection.
INSPECTING THE BIT
Since use of a dull bit will degrade efficiency and cause possible
motor malfunction, sharpen or replace the bit as soon as abrasion is
noted.
INSPECTING THE MOUNTING SCREWS
Regularly inspect all mounting screws and ensure that they are
properly tightened. Should any of the screws be loose, retighten them
immediately. Failure to do so could result in serious hazard.
Cleaning & Lubrication
Use only mild soap and damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the tool into a
liquid.
Self-lubricating bearings are used in the tool and periodic
relubrication is not required. In the unlikely event that service is ever
needed, take your tool to an authorized service location.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
Page 4
4
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D
WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D
WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D
WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D
WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
Publicidad
