Fellowes Pulsar E 300 Instrucciones página 4

ENGLISH
BEFORE YOU BIND
1
1. Check the green power neon
is on.
4
4. Pull comb-opening lever forward
to open the comb.
STEPS TO BIND
1
1. Ensure edge guide is set to the
proper document size. Punch front
and back covers first.
4
2
2. Select the correct comb
diameter using the comb
storage tray.
5
5. Test punch scrap sheets to check
edge guide setting.
2
Front
Cover
Max 20
30
(80gsm)
(20 lb)
Back
Cover
2. Punch sheets in small batches
that do not overload the machine
or the user. Adjust edge guide, if
necessary.
3
3. Insert the plastic comb into the
opening mechanism.
3
3. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4
4. When all punched sheets are
loaded onto the comb, push the
comb lever backwards to close
the comb and remove the bound
document.