Application; Warning; General Safety - MaxPro PROFESSIONAL MPER2000/12VGC Manual

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.

APPLICATION

This kind of electric router is designed for wood cutting, edge processing, decorative pattern, groove profile
milling and others, and it can replace different milling heads to meet the working requirements.
devotes itself to constantly improving and perfecting products, therefore, technical
performance and design theory will change, which may cause inconvenience without advance notice, and
we feel sorry for it. So please read and follow operation instructions carefully before operating the machine.

WARNING

Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Read all
safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury. Make sure the voltage corresponds to the type label on the unit. Packing
materials are no toys! Children must not play with plastic bags! Danger of suffocation! The power tool noise
output may exceed 85dB(A) at the workplace. In this instance, wear ear protection.

GENERAL SAFETY

Safety of Workplace
•Workplace shall be clean and tidy, and have good lighting. Dirty, messy and bad lighting may cause
unfortunate incidents.
•The electric tool shall not be used in the explosive environment, such as the environment with flammable
liquid, gases or dusts, because electric tool will produces sparks in work, which may cause dusts or gas fire.
•Children or other irrelevant personnel are not allowed to be close to the workplace when the electric tool
is in operation, and attention can't be distracted during work, for which will cause the electric tool out of
control.
Safety of Electricity Consumption
•Plugs of the electric tool shall be matched with the sockets of power grids, and structures of sockets shall
not be changed at any time. When electric tools with ground connections are used, adapters shall not be
used. Moreover, sockets and plugs which are not changer can reduce the risk of electric shock.
•All parts of body shall be avoided to be contact with the ground surface, such as the contact with tubes,
radiators, heating batteries and coolers. Body's contact with ground objects will increase the risk of electric
shock.
•The electric tool shall not be exposed to the rain or be affected with damp. Moreover, water ingress of the
electric tool will increase the risk of electric shock.
•Power lines shall be carefully noticed when they are used. Power lines shall not be used for dragging,
carrying, moving or pulling plug from the socket at any time. The location of power lines shall be away from
the places of heat sources, oil, sharp edge and moving parts, because damaged or disorder power lines will
increase the risk of electric shock.
•When the electric tool is used in the outside, extended lines which are suitable for the purpose shall be
used. The use of relevant power lines can reduce the risk of electric shock.
•If the electric tool has to be used in damp places, power lines with protective circuit breakers shall be
used, which will have a protective effect in the connection of closed circuit to the ground.
Personal Safety
•When using the electric tool, you shall keep vigilant, know what you are doing and keep conscious at any
time. Please do not use the electric tool when you are very tired and in the condition of sleepiness with
anesthetic, alcohol or medicines. Moreover, even slight inattention during the operation process of the
electric tool may cause serious harm.
•Personal protective device shall be used and eyepieces must be worn. Face masks, antiskid shoes,
helmets, headsets or other personal protective device shall be used in the corresponding conditions, which
2 GB