DCU Tecnologic Earhook IPX-6 Manual De Usuario página 14

ENG
Charge the earbuds:
1. Earphones are placed in the charging box and charged automatically.
2. The red LED indicator lights up and the charging starts automatically.
It takes about 1 hour for a full charge.
3. After fully charged,the red LED lights go out.
Secure fit:
1. Please check the "L" and "R"
2. Put the earbuds on your ears. Please adjust the angle according to your ears
and make surethey fit in the ear securely and comfortably.
Power ON/OFF:
Power on:
1. Open the charging case, take the earbuds out, the earbuds are powered on
automatically. The blue light flashes fora second, Red and blue lights
flashing alternately.Prompt sound:Power on,Pairing
2. Power on by button:Long press the left or right sides for 3 seconds.The
blue light flashes for a second, Red andblue lights flashing
alternately.Prompt sound:Power on,Pairing
Power off:
1. Put the earbuds into the charging case, the earbuds will automatically
power off.The red light is alwayson(Charing)
2. Power off by button:Long press the left or right sides for 3 seconds.The red
light is on for about 1second.Promptsound:Power off.
3. It will be power off automatically when there is no connection of the left/
right earbud for about 5 min.
Earbuds connection:
Earbuds connection with each other (First Manual Matching) The right ear is the main ear.
1.Wearing Earphones on the ear,Manual simultaneous long press of left and right ear buttons for 3 seconds.Release your
hand after hearing voice prompt "Power on,Pairing".
14
Long press about
3 seconds
Long press about
3 seconds