Electrical Safety - Steinberg Systems SBS-PT-300S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
h)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off).
i)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
j)
Keep the unit in good working condition.
k)
Keep the unit out of the reach of children.
l)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
m) To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
n)
Clean the unit regularly to prevent permanent dirt build-up.
o)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
p)
Do not tamper with the unit to alter its performance or design.
q)
Keep the unit away from sources of fire and heat.
r)
Do not overload the unit.
s)
Keep unused batteries out of the reach of children.
t)
Avoid high humidity that could cause condensation and direct contact with
water.
u)
Do not place the scale near open windows or doors, air-conditioning systems
or fans, which may cause unstable measurement results due to improper air
circulation.
v)
Do not leave any mass on the scale for a long time. This reduces the accuracy
of the scale and shortens the life of the sensors.
w)
Do not use the scale during a storm or rain.
x)
Avoid extreme temperatures. Do not place the scale directly in the sun or near
air conditioning systems.
y)
Before taking a measurement, make sure that the device is placed on a stable
surface, is not exposed to vibrations or sudden temperature changes that may
adversely affect the measurement results.
z)
The scale should not be subjected to any shocks, mechanical pressure or falls.
The scale should not be used near power-consuming devices such as welding
aa)
machines or large electric motors.
machinery.

2.1. Electrical safety

CAUTION! The "electrical safety" rules must be followed when the unit is powered
from the mains.
a)
The power plug must fit into the outlet. Do not modify the plug in any way.
Original plugs and matching outlets reduce the risk of electric shock.
Do not place it next to heavy or vibrating

Publicidad

Tabla de contenido
loading

Tabla de contenido