Bluetooth Operation - Ibiza sound WAVE8 Manual De Uso

18. POWER: To switch the unit on and off
CONNECTION OF A MICROPHONE
Connect the microphone to one of the MIC inputs and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.
KARAOKE Function
This feature is available with any input. Play a track through USB/TF/Bluetooth/FM, connect a microphone and
sing along. Adjust the volume, echo, bass and treble via the MIC button (7) and the VOLUME wheel (6).
USB/TF Operation
Switch the unit on.
Insert a USB stick or a TF card. The music stored on the stick or card will be played automatically.
• Play/pause: Press to play, press to pause, press again to resume play.
• Previous/Next: During play press once to go back to the beginning of the track or to the next track/
• Repeat: During play press to repeat the current song
• Adjust the volume with the VOLUME control (6)

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button on the unit or the remote control to select the Bluetooth func-
tion.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "WAVE8".
4. Press the PLAY button on the unit, the ▶
ing and the buttons NEXT and PREV, or the keys  and  for the selection of songs. Adjust the volume on
your Bluetooth device and/or with the VOL+/- button.
FM (radio) Mode:
Press MODE button to select "FM".
Auto radio station search and storage: Press the PLAY/PAUSE button and the unit will automatically search for
radio stations in the radio frequency range between 87.5 and 108.0 MHz. After finished the searching, auto
searching will stop and the found stations will be saved automatically. You can access the stored stations via the
number buttons on the remote control.
AUX mode
Connect an audio lead from the Line output of your audio device to the AUX input on the unit. When a device
is plugged into the AUX socket, it will disconnect all other audio devices. In AUX mode, all functions can be
controlled by the external device.
TWS function
1. Make sure both speakers are OFF.
2. Go to your phone's Bluetooth interface and make sure that it is not connected to either of the speakers. If
your phone is connected, choose to forget or remove the speakers from the list of available devices.
3. Turn both speakers ON, press the MODE button on both speakers. The word « BLUE » should appear on both
LCD screens and flash intermittently.
4. Press the « NEXT » button on either one of the speakers for 5 seconds. Both units will enter pairing mode.
5. One of the units will show the word « BLUE » on the LCD display. This is the master unit and will act as the
left channel, while the other one will be the slave unit and will act as the right channel.
6. Go to your phone's Bluetooth interface and select « WAVE8 » from the list of available devices. If pairing is
successful, the word BLUE on the master unit will stop flashing.
7. To disconnect the speakers, select any other mode on either one of the speakers.
4
MANUAL - WAVE8
key on remote control or on the connected device, to start play-
