EAS ELECTRIC EMCF153 Manual De Instrucciones página 25

2.2
Recommended
gear
(The picture above is only for reference. The actual configuration will depend
on the physical product or statement by the distributor)
2.3 Placement
Recommended
gear
 Please connect the chest freezer to power,
 Rotate the thermostat knob clockwise, the
 See the schematic marking position for the
Before using the freezer, remove all packaging materiales in-
cluding bottom cushions and foam pads and tapes inside the
freezer, tear off the protective film on the door and the freezer
body.
Keep away from heat and avoid direct sunlight. Do not place
the freezer in moist or watery places to prevent rust or
reduction of insulating effect.
The freezer should be placed in a well-ventilated indoor place.
The ground shall be flat and sturdy.
The top space of the freezer shall be greater than 70cm, and the
distances from both sides and backside shall be more than
20cm to facilitate heat dissipation.
the "POWER" lamp will shine (green light).
temperature inside the chest freezer will be
lower and lower.

"COOLING" refers to the cooling zone,
"FREEZING" means the freezing zone.
recommended gear.
10 V.1