Infiniton CL-38WC Manual De Instrucciones página 38

6. Remove the whole cover plate (7) at the right side.
7. Before placing the lower hinge (2), remove the bolt pin (9) and reverse the direction of the
lower hinge (2). Then install the lower hinge (2) onto the left side of the lower frame with
the three screws.
8. Insert the bolt pin into the lower hinge (2).
9. Set the door to its place in the lower hinge (2).
10. While holding the door in the closed position, secure the upper hinge (5) to the top frame
of the left side with the three screws. Please remember not to tighten the three screws until
the top of the door is leveled with the counter top.
11. Install the upper hinge cover (6) on the upper hinge.
6