Maintenance
Cleaning
Surface of the washer
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washer.
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
NOTE
• If the mesh filter is clogged, an information code of "4C" appears on the screen.
• Clean the mesh filter of the water hose more frequently if water is provided by an aged water system or
well.
52
English
Untitled-3 52
1. Turn off the washer, and unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose from the back
of the washer. Cover the end of each hose with a cloth
or towel to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the inlet
valve.
5. Submerge the mesh filter deeply in water so that the
threaded connector is also submerged.
6. Dry the mesh filter completely in the shade.
7. Reinsert the mesh filter into the inlet valve, and
reconnect the water hose to the inlet valve.
8. Open the water tap.
2022-05-27
11:00:51