Descargar Imprimir esta página

WERKU WK401090 Instrucciones Originales página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
CE DECLARATION CONFORMITY.
Werku
®
declares that the WK401090 sander-polis-
her is in accordance with the following Directives
and Standards:
2006/42/EC
2014/30/EU
EN 60745-1:2009/A11:2010
EN 60745-2-3:2011/A13:2015
EN 55014-1:2006/A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
La Coruña, 01/08/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power .......................................................... 710 W
Class ................................................................... II
Protection index ............................................ IP20
Speed rate ......................................... 60-110 min
Speeds ............................................................... 6
Disc diameter .......................................... 390 mm
Spindle ................................................................. M6
Net weight .................................................. 3.09 kg
Acoustic pressure LpA ......................... 83.4 dB(A)
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ........................ 94.4 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah - main handle ..................... 1.439 m/s²
Vibration Ah - auxiliary handle ................. 1.745 m/s
Respective uncertainity Kh ..................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been mea-
sured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear mouth and nose protection
Double insulation
European conformity
2002/96/CE Directive
SAFETY INSTRUCTIONS.
This power tool is intended to function as a sander-
polisher . Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed be-
low may result in electric shock, fire and/or serious
-1
injury. Keep all warnings and all instructions for futu-
re reference. Accidents can be avoided in many ca-
ses by recognizing a potentially hazardous situation
before it occurs and by observing appropriate safety
procedures. Operations for which this power tool was
not designed may create a hazard and cause perso-
nal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks could
ignite these materials. Keep away from children
and curious while operating a power tool. Distrac-
tions can cause you to lose control.Keep bystan-
ders a safe distance away from work area. Anyone
entering the work area must wear personal protec-
tive equipment. Fragments of work piece or of a
broken accessory may fly away and cause injury
beyond immediate area of operation.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use com-
mon sense when operating this power tool. Do not
use this power tool while tired or under the influence
2
English
TÜV-GS Certification

Publicidad

loading