Sangean WFT-1Di Manual De Instrucciones página 19

GB
Connecting to wired network
Connect the Ethernet cable into the RJ-45 socket at the back of the ra-
dio. If a wired connection is present then the radio will use this in prefer-
ence to a wireless connection.
There are two indicator lights incorporated into the RJ-45 connector.
If you have problems with your wired connection, they may help you to
identify the possible cause of the problem.
Green ON = Link established, Flashing = Data transfer.
Yellow ON = 00M bps link, OFF = 0M bps link.
8