ErgoAV ERMTM1-01B Manual De Instrucciones página 10

2A-2
2A-3
2A-4
A1
Position the 6@,,y,@HwHw#y,@HwpT
at your desired height and line up
the holes with your stud center line.
Level the 6@,,y,@HwHw#y,@HwpT
04
and mark the holes.
Drill pilot holes using a 7/32 in
(5.5mm) diameter drill bit. Make
sure the depth is not less than
2 3/4 in (70mm).
Note: Do not use a drill to tighten the
lag screws. Only use a socket wrench.
Install the wall plate using lag
x.Ww6xpoT10d5HwBH5w,@d
x.Ww6xpoT0xyI,,wc‰ W #,q
against the wall plate. DO NOT
kfwWH0d5HwBH5w,@dx.Ww6xpoT
01
10
Level
(Not Included)
0B ## ‚
1/2 in (13mm)
Socket Wrench
Level
(Not Included)
(Not Included)
Pencil
(Not Included)
Electric Drill
(Not Included)