Descargar Imprimir esta página

Team kalorik TKG FTL 1090 BU Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Never use accessories that are not recommended by the
producer. They could constitute a danger to the user and risk
to damage the appliance.
Never move the appliance by pulling the cord. Make sure the
cord cannot get caught in any way. Do not wind the cord around
the appliance and do not bend it.
In order to avoid any possible damage due to the normal
temperatures of the appliance in use, please respect the
following installation instructions:
place the back side as close to the wall as possible
leave at least 10 cm of free space on each side and above the
appliance.
As a general rule, make sure there is enough ventilation in the
room around this appliance during operation. Stand the
appliance on a stable heat-resistant surface (not a varnished
table or a table cloth).
Make sure the appliance has cooled down before cleaning and
storing it.
Only cook consumable food. Do not place large pieces of food
or metallic utensils in the airfryer in order to avoid all risk of fire
or electrocution. Also never place the following materials in the
air fryer: paper, cardboard or plastic...
It is absolutely necessary to keep this appliance clean at all
times as it comes into contact with food.
Make sure the cord never comes into contact with the hot parts
of the appliance.
The temperature of the accessible surfaces, such as the door
of the airfryer, may be very high when the appliance is in use.
Never touch those surfaces during use nor before the
appliance has totally cooled down, and only handle the knobs.
Make sure the hot parts of the appliance never come into
contact with inflammable materials, such as curtains, cloth, etc.
when it is in use, as a fire might occur. Also make sure not to
cover the appliance and do not put anything on top of it. Make
sure nothing comes into contact with the heating element of the
appliance.
5
TKG FTL 1090

Publicidad

loading