Line Output; Record Player Characteristics - THOMSON TT300 Manual Del Usuario

Use:
• Place a record on the record player turntable (9) and select the appropriate playback
speed: 33 or 45 rpm (8). (The default playback speed is 33 rpm for 12 inch (30.48 cm)
records. Press the speed selector (8) to switch to 45 rpm for 7 inch (17.78 cm) records.
• Remove the stylus protector and release the tone arm (4). Push the lever (2) up to raise
the tone arm (4), then gently move the tone arm to the desired position on the record. The
turntable will begin to spin as the tone arm approaches the record.
• The deck will stop automatically when the record has finished. Press the Turntable auto-
stop button (6) if you don't want the record to stop automatically at the end.
• NOTE: this action is only necessary if your record is particularly long and stops
automatically before the end of the playback. You will normally not need to use this
function.
• Please also note that as soon as you press the Auto-stop button (6), the turntable will start
rotating. This is completely normal. Press the Auto-stop button again to stop the rotation.
• When the record has finished playing, push the lever (2) back to raise the tone arm and
gently place it back on the arm rest (3), then lock the tone arm to protect it from any
unexpected movement.
Please note:
To avoid damaging the stylus, make sure the stylus protector provided is in place when
installing, moving or cleaning the turntable.
When you play a 45 rpm record, use the 45 rpm adapter supplied with the device.

Line output:

• This system can be connected to an external device (e.g. amplifier or active speakers) via
the RCA line output (15) which is located at the rear of the product.
• Use the double male RCA to double male RCA cable to connect to an external device.
• If necessary, use the Double female RCA to 3.5 mm jack stereo cable to connect the 3.5
mm jack connector of the external device.
- EN 16 -