HOMCOM 820-255V90 Manual De Montaje E Instrucciones página 5

d) + , - : adjust room temperature .Temperature setting from 10-35 degree. "+" to increase
the desired temperature and "-" to decrease the desired temperature
e) Swing : Press this to activate oscillation. Press again to cancel.
f) ,turn on or turn off item . item always keep working 30 seconds of cool air after
turn off it . this design can protect item use longer.
Warning:
1. Before removing the plug from the socket, switching off and better work for 30-60
second for cool down in condition that protecting inner parts.
Remote control
Please use Lithium battery CR2025 3V.NOTE: the remote control buttons perform
the same functions as those on the control panel on the unit.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheat,e.g. due to the total or partial obstruction of the
grids. In this case, unplug the appliance, wait about 30 minutes for it to cool and
remove the object which is obstructing the grids. Then switch it back on as decribed
above. The appliance should operate normally. Should the problem persist, please
contact the nearest customer service.
NOTE: To assist in maintaining the internal components, after pressing the OFF
button the fan
will continue to blow room air for a period of 30-60 seconds before shutting down to
standby.
Battery
The remote control use one button cells, model No. CR2025 (3V). We recommend
the use of Lithium type battery for longer use.
4
EN