Grabo OTTOVAC Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3) PERSONAL SAFETY
a.
Stay alert, watch what you are doing
and use common sense when
operating a power tool. Do not use a
power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of
inattention while operating power
tools may result in serious personal
injury.
b.
Use personal protective equipment.
Always wear eye protection.
Protective equipment such as a dust
mask, nonskid safety shoes, a hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c.
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to a
power source and/or battery and
picking up or carrying the tool.
Carrying power tools with your
finger on the switch or energizing
power tools that have the switch on
invites accidents.
d.
Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
e.
Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
OTTOVAC | Operator's manual
f.
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair
and clothing away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
Removal of dust can reduce dust-
related hazards.
h.
Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action
can cause severe injury within a
fraction of a second.
4) POWER TOOL USE AND CARE
a.
Do not force the power tool. Use the
correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b.
Do not use the power tool if the
switch does not turn on and off
easily. Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c.
Disconnect the plug from the power
source and/or remove the battery, if
detachable, from the power tool
before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido