Grabo OTTOVAC Manual De Instrucciones página 16

EN
EXPLANATION OF SYMBOLS USED ON TOOL
FR
❷ Read the operator's manual before use
ES
❸ and ❹ Wear protective shoes and gloves
NOISE EMISSION/VIBRATION
A-weighted sound pressure level LpA=79.4 dB(A), uncertainty K=3 dB(A). A-weighted
l
sound power level LwA=71.4 dB(A), uncertainty K=3 dB(A).
Vibration total value=1.240 m/s
l
total value has been measured in accordance with a standard test method and may
be used for comparing one tool with another. The declared vibration total value may
also be used in a preliminary assessment of exposure.
! WARNING: The vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used. It's
necessary to identify safety measures to protect the operator based on an
estimation of exposure in the actual conditions of use (under consideration of all
parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
TRANSPORT
The OTTOVAC is not shipped with batteries. This is to reduce the risk of hazards when
shipping the device.
OPERATION
LIFTING TECHNIQUES
Plan ahead. Know what you are lifting and how you will lift it. Be aware of the weight
l
of the object. Determine whether or not it is safe to lift on your own. Make sure the
work area is flat, dry and clear of debris.
Check your path. Make sure the lift path is clear. Remove any tripping hazards or
l
debris.
Check for any wet or slick surfaces.
Use ergonomic equipment. Use lift assists such as a forklift, dolly, cart, hand truck,
l
or hoist.
16
2
, uncertainty K=0.11 m/s
2
. The declared vibration