Placement And Leveling - Midea MES30S2AST Instrucciones De Instalación

Placement and Leveling:

CAUTION
LACERATION, FOREIGN OBJECT, CRUSH HAZARD
• When installing, moving, or servicing any appliance, wear proper
protective equipment, including cut resistant gloves, steel-toed
shoes, and safety glasses.
IMPORTANT
PREVENT DAMAGE
• Do not move unit by pushing or pulling on the door or control panel.
Do not lift by the cooktop edges. Push, pull, or lift only on the body
or structural areas, such as oven, oven face, or back corners of range.
• Move range by lifting, not sliding, to prevent damage to floors.
Use cardboard, plywood, or stiff plastic to protect floors if sliding is
necessary.
Getting the unit properly placed in the installation
space and level may require multiple attempts.
It is recommended to measure and adjust leveling legs
carefully before placing into the installation space, as
the leveling legs may be difficult to adjust once the
range is in its final position.
All ranges are heavy - sliding the range can damage the floor. Use care
when moving the range. Use a belt when moving the range to prevent
damaging the floor, or use cardboard, plywood, or stiff plastic to avoid
damaging the floor while sliding the range.
CAUTION: Please DO NOT
push the unit strongly when
you install. These actions can
cause the damage to the unit.
24
TO
Please DO NOT grasp the
knob and push when you
install. (Grasp the L/R door
area to push the unit)