WIKA Obsolete TR70 Instrucciones De Uso página 28

With one switching output and one analogue output
Degree Celsius
Degree Fahrenheit
Switch 1, Set Point
Switch 2, Reset Point
Contact 1
Normally open
Normally closed
Current high
Current low
Store
1) The pressure units setting applies immediately for the switching point settings, the reset points
and for the process pressure 4-digit LED display.
28 Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso TR70
Temperature units
Select set point for first switch
Select reset point for first switch
Select contact function for first switch
Select normally open contact
Select normally closed contact
Select temperature value for 20mA
SElect temperature value for 4mA
The previous changes are only accepted if button 2 is
pressed about 1 seconds after the previous button
press!
GB