Unpacking The Appliance; Finding The Wall Studs - Danby DOM014401G1 Manual De Instalación

INSTALLATION INSTRUCTIONS

UNPACKING THE APPLIANCE

1. Open the carton and remove the upper foam
from the box. Keep the accessories.
2. Remove the microwave from the carton and
remove the plastic bag.
3. Remove the mounting bracket from the upper
foam.

FINDING THE WALL STUDS

1. Use a stud fi nder to locate the wall stud. If a
stud fi nder is not available, use a hammer to
tap lightly on the wall to fi nd a solid sound. This
sound indicates the location of the wall stud.
2. Find the center of the wall stud by probing the
wall with a small nail to fi nd the edges of the
stud. Draw a line down the center of the wall
stud.
Note: The microwave must be connected to at least
one wall stud.
1
2
3
6