Switch Appliance On; Set The Speed Levels; Set Timer / Countdown (17) - CASO DESIGN KM 1800 Black-G Manual Del Usuario

PLEASE NOTE

Caution! The gearing of the food processor is continuous. When the drive for the
mixing elements is running, the drive for the accessories is also running. Mount the
front cover when using the mixing elements or place the mixing bowl under the rear
drive when using the accessories to avoid injury.

There may be a slight odour when using the appliance for the fi rst time. This is
harmless and disappears with time.

5.2 Switch appliance on:

1. Check that the mixing elements or other accessories are fi rmly mounted on the food
processor.
2.
Tilt the motor head down and make sure that the release lever is engaged.
3.
Plug the power plug into the power outlet.
4. The button (11) pulsates and the appliance is in stand-by mode.
5.
Wake up the display by tapping the

5.3 Set the speed levels:

1.
The speed indicator (12) fl ashes.
2.
You can set speed levels from 1 to 10 by tapping the
setting the desired level.
3. You can start, pause or stop the mixing process by tapping the
4.
During the process, you can increase or decrease the speed by tapping the
buttons to increase or decrease the speed.
5.
Set the speed level to 0 and the appliance stops the process.
6. Use the button (16) to switch between the speed levels and the time setting.
PLEASE NOTE

After approx. 10 min. without action, the appliance goes into stand-by mode.

If the motor head is tilted upwards during use, the food processor stops immediately.
This safety mechanism protects against injury.

5.4 Set timer / countdown (17):

1.
You can set a timer by pressing the
be set in 10-second increments or in minute increments by holding down the
buttons.
2.
Press the button to start the mixing process and timer. The time is counted down.
3.
If you pause the process, the time display is also paused. When you press the
ton again, the food processor works at the speed at which it was previously set and
the time continues to count down.
4.
When the timer expires, the food processor stops and signals the end of the process
with 3 beeps.
PLEASE NOTE

Count-up: If you do not set a timer, the display shows you how long the process has
been running.
button.
(13) or
and buttons (max. 60 min.). The time can
CASO KM 1800 Black-G
button (14) and
button (15).
and
and
but-
33
DE
EN
FR
IT
ES
NL
PT
PL
SE