Thulos TH-EXT10 Manual De Instrucciones página 21

ASSEMBLY PROCEDURES STEP
1
1-1. Put the 3 pcs post brackets on each position on the base
as shown in the picture.
1-2. Use 3 Medium Bolts(M8x16) to join the post brackets and stand.
STEP 2
2-1. Put the post on the top of 3 pcs post brackets.
2-2. Use 6 Large Bolts and Flange Nuts (M6) to connect the post to
the 3 pcs post brackets. Tighten the bolts and nuts.
STEP 3
Place the tank housing on the stand.
STEP 1
Post bracket
Bolt
Stand
STEP 2
Post
Bolt
Nut
STEP 3
Tank housing