Thulos TH-EXT10 Manual De Instrucciones página 22

STEP 4
4-1. Remove the 4 bolts from the burner.
4-2. Put the gas hose through into the post.
4-3. Fix the burner unit to the post by the 4 bolts.
STEP 5
5-1. Check whether the connection of vertical post and burner
are assembled according to instructions, and all bolts and
nuts are tightened.
5-2. Put 6 pcs Large Flat Washers on 3
STEP 6
Fasten the reflector with 3 pcs Large Flat Washers and 3 pcs Wing Nuts.
Reflector Spacers.
STEP 4
Bolt
STEP 5
Reflector Spacer
STEP 6
Wing nut
Reflector