Connection To The Water Supply - Mac allister MPWP1800-3 Manual Del Usuario

Before you start
EN

Connection to the water supply

WARNING! This product is not intended to be connected to the
potable water mains!
Observe the regulations of your local utility company when
connecting the product to a water supply line! It is prohibited to
connect this product to the drinking water facility without a backflow
preventer which corresponds to EN 12729 Type BA or EN 61770!
Make sure that the hose is at least a diameter of min. Ø 12.7 mm
(1/2") and is reinforced!
> Attach the water hose adaptor (19) on the water inlet (14).
> Attach a suitable water hose (not included) onto the water supply and then the
other end onto the water hose adaptor (19) (Fig. 11).
NOTE: The adaptor (19) contains filters (19a) to protect the product
against larger particles. Ensure the filters are fixed appropriately in
position. Do not use the water inlet and the adaptor without filte .
> Open the water supply.
18
MNL_MPWP1800-3_MAC_GB_V6_200527.indd 18
14
19
Fig. 11
MPWP1800-3 by MacAllister
19a
5/27/20 5:54 PM