Cleaning & Disinfection - Feellife A5 Manual De Usuario

3) If you need to replace the inhalation method, you need to replace the mask, nozzle and nose
plug. Please clean the spray interface section after using at each time. (see "Cleaning and
disinfecting").
4) After spray, spray connector and mesh disc will congeal medication liquid which will infect the
effect of spray. We suggest to stop the spray and take off mask, use clean medical gauze to dry
up the residue.
8. Cleaning & Disinfection
After each use, it is necessary to clean and disinfect the cup components (including medication
cup, lid), connector, mask, etc. The specific methods of cleaning and disinfection are
recommended as follows:
1. Cleaning
Please turn off the power when cleaning machine. Do not connect the machine with power
supply.
1) Remove the components from the main unit: the medicine cup components (including
medication cup, lid), connector, mask, etc. And soak all the components in clean water (which is
no more than 40 degrees centigrade) for about 5 minutes.
2) After cleaning, wipe all the components with clean and sterile medical gauze, and keep them
dry sufficiently.
3) Wipe the outer shell of main unit. If there is residue medicine remaining at the electrode
contact, please clean it with wet sterile medical gauze. After cleaning, keep the main unit dry.
4) Store the all parts in a dry and clean place to avoid contamination.
Note:
The main unit can not be washed with water to prevent water from entering the main unit.
Use clean sterile gauze to wipe off water on the main unit and components. Keep them dry to
ensure safe use next time.
14