Product Introduction - Aqara E1 Manual De Instrucciones

Product Introduction

Curtain Driver E1 is a motorized device that can control your existing
curtains automatically, it is based on the Zigbee 3.0 wireless protocol and
can achieve scheduled control of curtains, and work with other smart
devices when connected to the Aqara Home app.
*An Aqara Zigbee 3.0 hub is required. Some functions require specific models of hubs.
Please consult www.aqara.com/support for more details.
Wheel
Hook
Light sensor
Warnings
1.This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
2.Children shall not play with the appliance.
3.Cleaning and user maintenance shall not be made by children without
supervision.
4.WARNING: the drive shall be disconnected from its power source during
cleaning, maintenance and when replacing parts.
5.It must only be supplied at safety extra low voltage corresponding to
the marking on the appliance.
6.WARNING: Important safety instructions. It is important for the safety of
USB Type-C port
01
Indicator
Setting button
Click once: to open, close or stop
the curtain;
Click twice in succession: to
release, withdraw or stop the
hook;
Click three times in succession: to
manually set the start or end
position of the curtain;
Touch & hold for 5 seconds: to
turn on the device or reset to
factory settings;
Touch & hold for 10 seconds: to
turn o the device.