Nmea 2000® Pinout; Connection To The Nmea 2000® Network - Veratron VL FLEX 52MM Serie Manual De Instrucciones

NMEA 2000® PINOUT
Pin no. Description
1 Shielding
2 NET-S (V+)
3 NET-C (V-)
4 NET-H (CAN H)
5 NET-L (CAN L)
CONNECTION TO THE NMEA 2000® NETWORK
Once mounting is complete, the device can be connected to
the NMEA 2000® network via the designated socket on the
cabling.
Make sure to screw the plug all the way on. This is the only way
to guarantee that the connection is waterproof.
A drop cable is only required if the total length of the supplied
cabling is not sufficient to reach the NMEA 2000® backbone.
In this case it is possible to extend the cable with one of the
additional drop cables.
Note that NMEA 2000® does not allow drop cables longer
than 6 meters.
Stick to the NMEA 2000® standard for proper network setup.
CONNECTIONS
Micro-C M12 5-pin connector
Male, Cable View
B000882