Display Layout; Single Layout; Dual Layout - Veratron VL FLEX 52MM Serie Manual De Instrucciones

DISPLAY LAYOUT

SINGLE LAYOUT

A. Symbol
Indicates, which data type is displayed right now.
For the data types, which support this function, there is
also the instance indicated here.
B. Unit
Shows the unit of the currently displayed data.
For some data types it's possible to change the unit in
the settings. (See table "Supported Configurations")
C. Measured value
This shows the numeric value of the dedicated
measured data. If there aren't any values received for
this data type or they are out of range, the display will
show "---".
Coloured Graph
The coloured graphic in the background is a bar
diagram that puts the measured value in perspective.
This function isn't supported for all data types.
The white lines on the left side show the scalation.

DUAL LAYOUT

A. Symbol
Indicates, which data type is displayed right now.
For the data types, which support this function, there is
also the instance indicated here.
B. Unit
Shows the unit of the currently displayed data.
For some data types it's possible to change the unit in
the settings. (See table "Supported Configurations")
C. Measured Value
This shows the numeric value of the dedicated
measured data. If there aren't any data received for this
data type or the values are out of range, the display will
show "---".
The bar graph can't be displayed in the dual layout for
any value.
A
C
B
A
DISPLAY LAYOUT
B
C
B000882