Midea MCS2025GB Manual De Instrucciones página 9

Maintenance guide
3. The dust cup houses the circular sponge
filter and filter assembly. Firstly remove
the circular sponge filter by pinching the
ribbon material at the top of the filter and
pulling upwards, then set aside.
4. Pinch either side of the filter assembly
and pull upwards away from the dust
cup. Tap the filter assembly gently over
the household bin to remove any large
amounts of dust.
Note: Do not allow the dust cup to overfill.
Don't exceed the MAX level marker.
Empty regularly.
5. Remove any more excess dust from the
filter assembly using a soft brush or a clean
paint brush. The filter can be broken down
into three parts. Hold the top section and
twist the lower section in the direction of
the arrow and the unlock padlock icon.
6. Rinse the dust cup, filter assembly parts
and circular sponge filter under warm
water until the water runs clear and leave
to dry for 24 hours.
9