Sekey Home 3002 Manual De Instrucciones página 13

Down Light
At the default interface, Press and hold the button D(MENU) to select the down light,
it's displayed "doLi" as shown below.
Press OK button to start the down light setting.
Press the button E(+) or F(-) to select the down light levels. Levels include
D1/D2/D3/D4/OFF.
D1 is the brightness level, OFF is no down light.
NOTE: This appliance doesn't have down light feature.
NOTE: If no operation is performed on the control panel or remote control after 15
seconds, the display will return to the default interface.
Mode Selection(Secondary Menu)
At the default interface, Press and hold the button D(MENU) to select Mode Selection,
it's displayed "Mode" as shown below:
Press OK button to access Mode menu.
Press the button E(+) or F(-) to select the desired mode.
1) Open Window Detection Mode
Press and hold button D(MENU) to select Mode menu.
Press OK to validate, then E(+) or F(-) to enter the Open Window Detection Mode. The
screen displays "OPEN" as shown below:
Press OK to validate, then button E(+) or F(-) to select ON or OFF. Press the OK
button to turn on or off the Open Window Detection Mode.
After activating the Open Window Detection, the appliance will automatically shut off
the heating when it detects the room temperature decreased more than 4°C within 10
10