Sekey Home 3002 Manual De Instrucciones página 17

To finish the setting, press the button E(+) or F(-) to find "FINSH", then press OK to
finish the setting.
Multi time periods could be used for one day.
Same time period could be used for multiple days.
NOTE:
For the settings under Mode Selection (Secondary Menu), always remember to press
the button C(OK) to validate the setting.
Maximum 8 time periods could be used for one program.
After the weekly program is manually set, the relevant program has been manually set,
and the default program settings will be updated accordingly.
Restore Factory Defaults
Unplug the device from the power source for no less than 5 seconds, and then plug it
in to restore the factory default settings.
Using the Remote Control
This heater includes a remote control. To use the remote control to operate the device,
the Master Power Switch (A) must be in the "ON" position.
All the buttons on the remote control have exactly the same functions as those on the
control panel.
14