Sekey Home 3002 Manual De Instrucciones página 16

Press the button E(+) or F(-) to select the heating level. H for high heating and L for low
heating. Press Ok to validate.
Press the button E(+) or F(-) to set your desired temperature. Press OK to validate.
Press the button E(+) or F(-) to set the hour of the activation time. Press OK to
validate.
Press the button E(+) or F(-) to set the minutes of the activation time. Press OK to
validate.
Please note that the minute setting is accumulated by 5 minutes each time.
Press the button E(+) or F(-) to set the duration of the time period. Press OK to
validate.
Please note that the duration time setting is accumulated by 30 minutes each time.
Now the 1st time period of program is completed. It's displayed as "CON" (confirm).
NOTE: The program cannot run into the next day. Therefore, the maximum duration
cannot exceed midnight (for example, if the start time is 20:30, the maximum duration
displayed is 4 hours and the real maximum duration is 3 hours and 30 minutes).
To continue the setting for the 2nd time period, press OK to continue so that the screen
will return to the interface of day selection for the 2nd time period.
13